
Warranty Shipping Return Installation Policy
APEX DOORS
Warranty Shipping Return Installation Policy
Effective Date: November 19, 2026
IMPORTANT PURCHASE ACCEPTANCE NOTICE
BY ORDERING A PRODUCT, PAYING A DEPOSIT, SUBMITTING PAYMENT, APPROVING AN INVOICE OR QUOTE, PICKING UP A PRODUCT, ACCEPTING DELIVERY, INSTALLING A PRODUCT, OR AUTHORIZING ITS INSTALLATION, THE CUSTOMER CONFIRMS THAT THE CUSTOMER RECEIVED OR HAD A REASONABLE OPPORTUNITY TO REVIEW THIS POLICY AND THE APEX DOORS LLC TERMS AND CONDITIONS AND AGREES TO BE LEGALLY BOUND BY BOTH. THIS ACCEPTANCE SPECIFICALLY INCLUDES THE MANDATORY INDIVIDUAL ARBITRATION PROVISION REQUIRING MOST DISPUTES TO BE ARBITRATED WITH THE LEGAL SEAT IN BEXAR COUNTY, TEXAS.
This Policy applies to products sold by Apex Doors LLC, including wrought-iron entry doors, pivot doors, aluminum entry doors, aluminum sliding doors, bifold and folding systems, fixed panels, glass panels, frames, thresholds, hardware, and related components. It supplements the Apex Doors LLC Terms and Conditions and transaction-specific documents.
1. Business Information
Business Apex Doors LLC
Address 143 W. Rhapsody Dr. San Antonio, TX 78216
Website https://www.apexdoorstx.com
Email info@apexdoorstx.com
Telephone 210-251-4163
2. Limited Product Warranty
Warranty Period
Unless a different written warranty is stated on the invoice or order acknowledgment, Apex Doors provides the original purchaser a one-year limited product warranty beginning on the original delivery or pickup date. The warranty is nontransferable, applies only to qualifying defects in materials or workmanship under normal intended use, and is subject to every exclusion, installation requirement, maintenance duty, overhang requirement, and environmental restriction in this Policy. Repair or replacement does not restart or extend the original period.
Potentially Covered Defects
Subject to all exclusions, a substantial manufacturing defect affecting normal operation may qualify if it involves an original door frame, panel, factory weld, factory-applied component, hinge, roller, lock, hardware, factory weatherstripping, or factory-installed glass unit. Adjustment, settling, alignment, cleaning, lubrication, maintenance, sealant work, and weatherproofing are not manufacturing defects.
Exclusive Warranty Remedy
After inspection and evaluation, Apex Doors may, at its sole reasonable discretion, repair the qualifying component, supply a replacement component, replace the affected product, or provide another commercially reasonable remedy. The remedy is limited to the defective product or component.
Unless Apex Doors expressly agrees in writing, the warranty does not pay for labor, removal, reinstallation, demolition, drywall, stucco, masonry, paint, flooring, flashing, waterproofing, sealants, freight, lifting equipment, contractor charges, travel, loss of use, lost revenue, or incidental or consequential property damage, to the fullest extent permitted by law.
3. Warranty Exclusions
The limited warranty does not cover damage, failure, deterioration, corrosion, appearance, water intrusion, or performance issues caused by or related to:
-
Improper measurements, storage, handling, transport, lifting, installation, anchoring, shimming, adjustment, framing, rough openings, structural support, or out-of-square, out-of-level, or out-of-plumb conditions.
-
Foundation or building movement, settlement, structural failure, concealed conditions, construction debris, jobsite damage, scratches after acceptance, misuse, abuse, impact, accident, unauthorized repair, modification, cutting, drilling, grinding, welding, machining, or third-party hardware.
-
Improper or missing flashing, sill pan, membrane, waterproofing, perimeter sealant, drainage, weep system, grading, threshold protection, or building-envelope integration; blocked drainage; deteriorated sealants; standing water; or surrounding construction.
-
Inadequate roof overhang or weather protection; wind-driven rain; flood; hurricane; tropical storm; tornado; hail; lightning; fire; extreme heat or cold; excessive pressure; windborne debris; or other events outside the product itself.
-
Saltwater, salt spray, airborne salt, coastal or marine conditions, pool chemicals, irrigation, corrosive chemicals, galvanic action, rust, oxidation, pitting, discoloration, coating deterioration, harsh cleaners, pressure washing, or failure to perform required maintenance.
-
Normal wear, routine adjustment, ordinary finish fading, cosmetic variation within manufacturing tolerances, glass breakage after acceptance, screens, consumable parts, or any condition excluded by a manufacturer warranty.
4. Water Intrusion and Weather Resistance
APEX DOORS DOES NOT WARRANT THAT ANY DOOR SYSTEM IS COMPLETELY WATERPROOF OR THAT WATER INTRUSION CANNOT OCCUR UNDER ALL WEATHER CONDITIONS.
An exterior door is one component of a larger building-envelope and water-management system. Performance depends on building and roof design, overhang, orientation, wind exposure, flashing, membranes, sill pans, sealants, drainage, grading, installation, maintenance, and surrounding wall construction. The owner, builder, installer, architect, engineer, and waterproofing contractor are responsible for designing, installing, inspecting, and maintaining that system. Apex Doors is not responsible for water intrusion arising from conditions outside a covered manufacturing defect.
5. Required Overhang Policy
Exterior Protection
Exterior doors must be reasonably protected from direct rain, sunlight, and severe weather by a properly designed roof, porch, canopy, or permanent architectural overhang appropriate for the opening, elevation, orientation, exposure, and local climate.
Eight Foot Door Guideline
For an exterior door approximately eight feet tall, Apex Doors recommends a minimum five-foot-deep overhang measured outward from the exterior face of the door, with sufficient lateral coverage beyond both sides. This is a general minimum guideline, not an engineering determination. A larger overhang may be necessary for taller or wider openings, exposed elevations, prevailing weather, upper floors, coastal or high-wind locations, large glass areas, or substantial direct sun.
No Overhang No Weather Related Warranty
Exterior doors installed without adequate permanent protection may not qualify for warranty coverage for water intrusion, finish deterioration, corrosion, swelling, seal failure, hardware deterioration, glass-seal stress, or other exposure-related conditions. An overhang does not make a product waterproof and does not replace professional installation, flashing, membranes, sill pans, drainage, grading, and sealants.
6. Coastal and Saltwater Environments
Coastal and high-corrosion locations are severe environments. A property may be treated as coastal or high-corrosion whenever salt air, saltwater, humidity, wind, sand, chemicals, or similar exposure can reasonably affect the product, regardless of exact shoreline distance.
Unless Apex Doors issues a separate written coastal warranty for the specific product, the standard warranty excludes corrosion, oxidation, rust, pitting, discoloration, coating or finish deterioration, hardware deterioration, galvanic corrosion, and damage caused or accelerated by marine or corrosive exposure. Environmental surface rust or corrosion is not a manufacturing defect.
Required Coastal Maintenance
-
Regularly rinse exterior surfaces with clean fresh water and remove salt deposits.
-
Clean tracks, sills, drainage channels, and weep openings and keep them unobstructed.
-
Inspect hinges, rollers, locks, fasteners, and other hardware frequently and lubricate only as directed.
-
Inspect coatings for scratches or damage and promptly repair protective finishes using compatible products.
-
Inspect perimeter sealants and replace failed or deteriorated sealants.
-
Increase maintenance frequency for direct salt-air, wind, pool-chemical, or irrigation exposure.
Failure to perform reasonable environment-specific maintenance may void coverage for affected components.
7. Windstorm Hurricane and Impact Ratings
Apex Doors does not represent that every product is hurricane-rated, impact-rated, windstorm-certified, or approved for every jurisdiction. The customer, architect, engineer, builder, and installer must determine applicable code, design pressure, impact resistance, windborne-debris, product-approval, anchoring, permitting, inspection, and certification requirements before ordering.
A product must not be represented as hurricane-rated, impact-rated, Miami-Dade approved, Florida approved, TDI approved, TWIA compliant, or windstorm certified unless documents for that exact product, size, configuration, glazing, hardware, anchoring, substrate, and installation support the representation.
Purchase does not guarantee an insurance approval or windstorm certificate.
8. Installation Policy
Apex Doors strongly recommends installation by a qualified professional experienced with the specific system. Installation must follow the manufacturer’s instructions, applicable evaluation or engineered drawings, approved plans, codes, permits, structural requirements, and appropriate water-management practices.
Unless installation is expressly included in a signed Apex Doors contract, Apex Doors acts only as the product supplier and is not responsible for work by builders, general contractors, subcontractors, installers, framers, waterproofing contractors, stucco or masonry contractors, architects, engineers, or other third parties.
Opening and Structural Verification
Before ordering and installation, the customer and installer must verify width, height, wall thickness, finished-floor elevation, header and structural support, substrate, plumb, level, square, handing, swing, panel direction, and required clearances. Apex Doors is not responsible for products ordered from inaccurate or incomplete customer-supplied measurements. The building must support the door system; large pivot, bifold, sliding, and glazed assemblies may impose substantial loads. Apex Doors does not provide engineering unless separately contracted in writing.
Waterproofing Drainage and Weeps
Installation must include appropriate flashing, sill pans where required, membranes, sealants, drainage, perimeter sealing, and building-envelope integration. Door installation alone does not constitute building waterproofing. Drainage paths, tracks, and weep openings must remain unobstructed and must not be blocked by mortar, concrete, grout, stucco, caulk, sealant, flooring, or debris. The owner must inspect and clean drainage after installation.
9. Installation by Apex Doors
When Apex Doors separately contracts to install, its scope is limited to the work expressly stated in the signed proposal or invoice. Unless specifically included, installation excludes engineering, structural or framing modifications, headers, masonry, stucco, drywall, painting, flooring, electrical or alarm work, whole-building waterproofing, roofing, drainage, hazardous-material work, permits, inspections, cranes, and correction of preexisting conditions. Concealed or unexpected conditions may require a written change order, additional charges, and schedule changes.
10. Shipping Delivery and Pickup
Processing, manufacturing, shipping, delivery, and pickup dates are good-faith estimates unless Apex Doors expressly guarantees a date in a signed writing. Supplier, production, freight, port, customs, weather, labor, material, carrier, governmental, site-access, and force-majeure delays are outside Apex Doors’ reasonable control and do not by themselves permit cancellation of a custom or special order.
The customer must provide an accurate address, telephone number, site-access details, and an authorized adult to receive the product. Unless included in writing, delivery does not include installation, unpacking, debris removal, crane service, or movement inside the property. Additional attempts, restricted access, storage, redelivery, or special handling may be charged.
Inspection Deadlines
Inspect products at delivery or pickup and record visible damage, broken glass, packaging damage, shortages, and incorrect items on the receipt before signing. Notify Apex Doors of visible issues within 48 hours and concealed damage within five calendar days, before installation, with the invoice number, description, photographs of the product and packaging, shipping label, and receipt. Do not install, alter, repair, discard, or dispose of a disputed product before instructions. Failure to preserve and timely document the condition may limit remedies, except where prohibited by law.
11. Storage and Unclaimed Products
The customer must accept delivery or collect the product within the agreed period. Delay caused by the customer, incomplete construction, lack of access, or nonpayment may result in storage, handling, rescheduling, or redelivery charges. Customer delay does not extend a warranty. After required notice, unclaimed products may be handled as permitted by the order documents and applicable law.
12. Cancellations Returns and Refunds
Custom and special-order products — including products ordered or manufactured to selected dimensions, configurations, handing, glass, finish, color, or hardware — are final sale once supplier ordering, production, fabrication, or material allocation begins and cannot be canceled, changed, returned, exchanged, or refunded except as required by law or approved in writing by Apex Doors.
Eligible stock-product returns require advance written authorization and must be unused, uninstalled, unmodified, complete, and in resalable condition. Approved stock returns may be subject to a 25 percent restocking fee. Original freight, return freight, special handling, custom charges, and payment-processing fees are nonrefundable to the extent permitted by law. An approved refund may be reduced by damage, missing parts, completed work, supplier charges, and other permitted costs.
13. Warranty Claims
To request warranty review, contact info@apexdoorstx.com or 210-251-4163 and provide the purchaser’s name, invoice number, product identification, delivery date, detailed description, clear photographs and videos, installation information, and other reasonably requested evidence. The customer must provide reasonable inspection access. Do not remove, repair, alter, or dispose of the product before written instructions unless immediate action is reasonably necessary for safety or to prevent additional damage.
Apex Doors’ determination that a condition is excluded does not prevent the customer from pursuing any nonwaivable right. Manufacturer warranties are governed by the manufacturer’s terms and decisions. Apex Doors may reasonably assist with a manufacturer claim but does not control the outcome.
14. Maintenance and Owner Responsibilities
The owner must follow all product-specific cleaning, drainage, adjustment, lubrication, operation, weather-protection, and maintenance instructions; inspect overhangs, flashing, sealants, sills, tracks, weeps, finishes, and hardware; correct drainage or building-envelope problems; prevent standing water and chemical exposure; and keep records of maintenance. Failure to maintain may reduce product life and void coverage for affected conditions.
15. Limitations of Liability
TO THE FULLEST EXTENT PERMITTED BY LAW, APEX DOORS WILL NOT BE LIABLE FOR INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, PUNITIVE, OR CONSEQUENTIAL DAMAGES, INCLUDING LOSS OF USE, LOST RENT, LOST REVENUE, LOST PROFIT, BUSINESS INTERRUPTION, OR DAMAGE ARISING FROM INSTALLATION, SURROUNDING CONSTRUCTION, WATER MANAGEMENT, DELAY, OR THIRD-PARTY WORK. APEX DOORS’ TOTAL LIABILITY FOR A SPECIFIC PRODUCT WILL NOT EXCEED THE AMOUNT ACTUALLY PAID TO APEX DOORS FOR THAT PRODUCT. NONWAIVABLE RIGHTS AND REMEDIES ARE NOT LIMITED.
16. Governing Law and Informal Resolution
Texas law governs this Policy and the related transaction, except where federal law controls. Before initiating arbitration, the claimant must send a written Notice of Dispute by certified mail to Apex Doors LLC, 143 W. Rhapsody Dr., San Antonio, TX 78216, and by email to info@apexdoorstx.com. The notice must identify the customer and invoice, explain the facts and legal basis, and state the requested resolution. The parties will attempt in good faith to resolve the dispute for at least 30 days after receipt.
17. Mandatory Individual Arbitration in Bexar County
PLEASE READ THIS SECTION CAREFULLY. IT REQUIRES MOST DISPUTES TO BE RESOLVED BY INDIVIDUAL BINDING ARBITRATION AND WAIVES JURY TRIALS AND CLASS OR REPRESENTATIVE ACTIONS.
Except for the limited exceptions below, the customer and Apex Doors agree that every dispute, claim, or controversy arising from or relating to a quote, invoice, order, payment, product, pickup, shipping, delivery, installation, warranty, return, refund, this Policy, the Apex Doors Terms and Conditions, or the parties’ relationship will be resolved exclusively through final and binding individual arbitration. This includes contract, warranty, tort, negligence, fraud, misrepresentation, statutory, consumer-protection, and equitable claims.
The Federal Arbitration Act, 9 U.S.C. Sections 1 through 16, governs this arbitration agreement to the maximum extent applicable. Arbitration will be administered by the American Arbitration Association under its Consumer Arbitration Rules then in effect. The arbitrator may award any individual remedy available under applicable law and must issue a reasoned written award. Fees will be allocated under the applicable AAA rules and law, and Apex Doors will pay amounts it is required to pay for enforceability.
The legal seat and exclusive place of arbitration will be Bexar County, Texas, regardless of where the product was sold, delivered, installed, or used, or where the customer resides. Hearings will occur in Bexar County unless Apex Doors agrees in writing or nonwaivable law requires another arrangement. A documents-only, telephone, or video hearing may be allowed under the governing rules; a remote participant’s location does not change the legal seat.
Claims may be brought only in an individual capacity. Neither party may participate as a claimant, class member, private attorney general, or representative in a class, collective, consolidated, coordinated, mass, or representative proceeding. The arbitrator may not combine different persons’ claims without all parties’ written consent. A court will decide enforceability of this class-action waiver.
Either party may bring an individual claim within the jurisdiction of a small claims or justice court. To the fullest extent permitted by law, that claim and any court action to compel arbitration, stay litigation, confirm, modify, or vacate an award, or obtain permitted provisional relief must be filed in Bexar County, Texas; however, mandatory nonwaivable venue or jurisdiction rules control. Either party may seek temporary emergency relief to protect persons, property, confidential information, or intellectual-property rights without waiving arbitration.
This arbitration agreement survives payment, pickup, delivery, installation, return, cancellation, warranty expiration, and termination of the parties’ relationship. If a provision is unenforceable, it will be severed or limited to the minimum extent necessary and the remainder will continue, subject to the special treatment of the class-action waiver stated above.
18. Purchase Acceptance and Policy Integration
BY ORDERING A PRODUCT, PAYING A DEPOSIT, SUBMITTING PAYMENT, APPROVING AN INVOICE OR QUOTE, PICKING UP A PRODUCT, ACCEPTING DELIVERY, INSTALLING A PRODUCT, OR AUTHORIZING ITS INSTALLATION, THE CUSTOMER AGREES TO THIS POLICY AND THE APEX DOORS LLC TERMS AND CONDITIONS, INCLUDING SECTION 17 OF THIS POLICY AND THE BEXAR COUNTY ARBITRATION PROVISION IN THE TERMS AND CONDITIONS. A HANDWRITTEN SIGNATURE IS NOT REQUIRED WHEN ACCEPTANCE OCCURS THROUGH ONE OR MORE OF THESE ACTIONS, TO THE EXTENT PERMITTED BY LAW.
Apex Doors should provide the customer a link or copy before payment or order approval and retain the version applicable to the transaction. If a signed order-specific document directly conflicts with this Policy, the more specific signed term controls for that transaction, except that arbitration terms remain effective unless the later document expressly replaces them.
19. Contact Information
Apex Doors LLC
143 W. Rhapsody Dr.
San Antonio, TX 78216
Email: info@apexdoorstx.com
Telephone: 210-251-4163
Website: https://www.apexdoorstx.com
Questions & Support
If you have any questions regarding our policies or need assistance, please contact our support team:
